Wider Viewing
I started some research on simple 3D characters so I could get an idea of what I could make that was relatively simple yet easy to rig and animate. I looked at a few people designs that I found online.
I started some research on simple 3D characters so I could get an idea of what I could make that was relatively simple yet easy to rig and animate. I looked at a few people designs that I found online.
I saw this bear design, it is simple and still has a basic humanoid structure (i.e. on two legs) The model looks well made and minus the face which is has a bit more detail it is a rather simple design that could be made in a reasonable amount of time. A 3D model like this would be quite suitable for a simple tuck, and flex animation and I will be aiming to make something of the same calibre. However, it was pointed out that the short legs would make animating them slightly more difficult.
This second character model is slightly more detailed/complex than the former as it has indications of clothing, hair and facial features, but structure wise is still quite simplistic. This type of model would be nice to animate if I were to have the time to make something similar, as I could then have a better idea of how the body would move if the character is more human like compared to something less human like the character bellow. I like how this model is constructed overall and would like to aim for something of this standard if I have the time.
This model is non-human but I can tell it still has a similar structure to a human model. The textures are very nice and they help portray the character well, though I will not be adding any textures to my own character. When I look at this character, with it being a robot I have the idea it will more quite stiffly or have sort of jagged movements.
The model in this animation is very simple and built up of basic shapes but the animation is ver fluid and made to look believable. When the model walks you can see the "hips" sway and the arms swing in time with the movements, the creator must have put a lot of effort into making such a smooth animations and it shows greatly in this video. It gives depth to the character and a sort of personality despite the lack of details on the model.
I got an example of another simple animation. The model is similar in design as the model pictured in the animation above, though this one does have the addition of eyes and a nose. I thought the way this model was built was very nice and simple, it also had working finger joints, which added a more realistic touch and the basic colours complemented the model.
Ideas Generation
Modeling
I would have liked to make this model, but it was too complicated for the time frame I had so I decide to go with one of my more simple design.
Wednesday 20th November
I had started re-making my model, this time I used my digital sketch as a base, where as before I just built my model by eye, over the Andy rig (on a new layer). I found this way I had more freedom with how big I could make my model and parts like his feet. I built my model as a half, unlike my first which I built all as one, this helped me keep my model symmetrical. I then had to use the mirror tool to mirror the half I had built onto the adjacent side. Also while building I decided to change the shape of the hands, because on my first model I didn't like the way the hands came out so I went for a more robotic style hand.
At one point I did have to remove some of the vertices from the hip are as there was too many, I simply selected the ones I wanted to remove and deleted vertices.
Critical Review
I finished my model, I did start rigging the model myself , but after I had a few problems and was running low on time I ended up using the Andy rig on my own model, both my first and my newer one. The pre-done rig works slightly better on my first model, because I had built it over the rig in the first place so it matched in size and placement, however my newer model, had a few little issues, specially with the knee, but this is something I'm happy to leave for now until I have to work on my animation.
I think I did reasonably well on this project, I would have liked to put more detail into the model, like maybe a few dents, more details on the lower legs especially as they came out rather plain. I think I need to practice more with modeling as I would like to get better, particularly with hands as these in my first model were very rigid and not refined at all.
I am happy with the way my model came out in the end, though I need to work on rigging models myself as this is something I had a lot of problems with.
I started writing down some ideas for my character and the type of animation I would like them to do, I like the idea of the robot one, but may not have it dancing and doing a different action instead. Something like looking at its arms and legs, like he has just been made and is looking at himself and learning to walk. The ideas are really still in the process, I need to look at more video of what other people have come up with to decide on what I want to do.
For more ideas I looked at the film Robots, I really like the designs of the character in Robots, they are very unique with each having their own little quirks and the parts are not all symmetrical. The characters look to be made to make the animation process simpler, with jointed feet/ankles and other joints that all correspond to the joints in a human this making it easier for the animator to move them fluidly and more realistically.
I looked at a variety of other robot models as well, the two below I thought were particularly good, in terms of how they are made.They also look very easy to animated and pose.
I like the below designs because of their small, compact forms, but as I understand shorter legs make it difficult to animated things such as walks and the like. Plus they also have short arms so I would be limited how I coloud more them, especially with the design to the right, as it doesn't particularly have any joints and I think this would be a challenge to animate something like this.
Pinocchio 3000 has some very interesting designs for the characters, I particularly liked Pinocchios design as it still maintained the anatomical structure of a human model, by this I mean everything such as joints/pivots and lims are in the correct places.
Modeling
I finally went with the idea of a robot model, I've done a few sketches on paper showing a couple different kinds of robots. I was especially inspired by Robots for the second drawing. I wanted to go for a design that was simple to make that is why I went with an idea that was pretty much all basic shapes, so I could make it relatively fast and be able to have time to rig the model even if I were to have difficulties.
I would have liked to make this model, but it was too complicated for the time frame I had so I decide to go with one of my more simple design.
The image below is a rough digital sketch I drew out to import into maya for reference.
Building my model, I started with the head and then built down the body and lastly the arms, I mainly used basic shapes such as cubes and spheres, but also used some cylinders and a couple pyramids for the knees.
I also received the suggestion to build my model over the Andy model so it was the same size and then I could "wrap" my model around the Andy model and use his rig to animate my model. You can see below my model compared to him and also what his rig looks like on my model.
This is the back view of my model, he is very simple and there is not much detail to him, though I would have liked to add some more details and the arms didn't come out as I had initially wanted.
To make the hands here I started with a cube and then used the Insert Edge Loop Tool to add in more sections, before using the Extrude tool to make each of the fingers.
His face is very basic in terms of features but I didn't want his to have a very over the top face, but I would like to add a pattern to it or maybe some raised or indented areas like in my original sketches.
I also had a go at rigging my model from scratch, I can move my model a little but it does become deformed in some areas because I haven't yet painted on the skin weights, which stop certain bones moving parts of the model they shouldn't. For example, if I move the hand bone and the head moves I have to go to Skin > Edit Smooth Skin > Paint Skin Weights Tool and colour the parts black to stop it from moving, or in a n opposite situation I would paint it white to make it move with the hand.
I also did a test render of my rig to show how the robot deforms when moved without the skin weights. I will not be painting them though as I will be using the Andy rig on my model.
At one point I did have to remove some of the vertices from the hip are as there was too many, I simply selected the ones I wanted to remove and deleted vertices.
Colouring the Model
I started adding colour to my model, I just used the basic colour setting in Maya instead of taking my model into Mudbox, a Maya extension that allows you to to add better details, such as indents in designs. I took my model in with the Andy rig, I was going to "wrap" my model around the Andy rig to save some time, but my model was slightly smaller so I edited it to match the size of Andy.
So this is my final model blue and black, I also coloured my first model gold and black, so I have 2 models to work with. I like the overall finish on my second model, but I prefer the way the legs came out on my first model.
Poses
Here are the test poses I did with both my first model and my newer model, I think both came out quite well and pose fairly nicely, though I do have issues with the knees and elbows.
I finished my model, I did start rigging the model myself , but after I had a few problems and was running low on time I ended up using the Andy rig on my own model, both my first and my newer one. The pre-done rig works slightly better on my first model, because I had built it over the rig in the first place so it matched in size and placement, however my newer model, had a few little issues, specially with the knee, but this is something I'm happy to leave for now until I have to work on my animation.
I think I did reasonably well on this project, I would have liked to put more detail into the model, like maybe a few dents, more details on the lower legs especially as they came out rather plain. I think I need to practice more with modeling as I would like to get better, particularly with hands as these in my first model were very rigid and not refined at all.
I am happy with the way my model came out in the end, though I need to work on rigging models myself as this is something I had a lot of problems with.






































